Enviro Westport C-10381 - Manual (Page 35)

35
1. Carefully remove logs from
box. Check to ensure there is
no damage. It is very important
to install all logs in their proper
position to insure safe, optimum
operating conditions.
2. Place the log set into the
firebox. Locate each log by
seating it down onto the burner
tray support pins. Follow Figures
48 to 54 proper log placement.
3. A bag of ceramic fiber
embers and rock wool embers
is provided gently remove the
ember material from the plastic
bag. Spread a layer loosely in
a random manner across the
burner tray. Do not allow any
embers to rest against pilot
assembly. (See diagram provided
for proper ember placement.)
DO NOT pack this ember
material as this could create an
unsafe condition, leave embers
loose.
4. Upon the first light up, watch
for ignition to ALL burner ports.
If a long delay is noted: First,
wait for the appliance to cool
down.
• Open the front door of the
appliance.
• Check to carefully reposition
the embers making sure that
burner ports are not plugged
solid or blocked.
Figure 56: Step 3 of Log Placement.
Figure 57: Step 4 of Log Placement.
Figure 58: Complete Log Placement.
Secondary Installation