RISCO Group Orbit Pro RP-296 - Manual (Page 19)

user manual
11
DELETING USER CODES
At times, it may be desirable to completely delete a User Code. Note that it is
impossible to delete the Master Code (although it can be changed).
STEP DESCRIPTION
1 The system must be disarmed. Enter the
User Functions Mode (
4
) and choose Codes (5):
2 Enter the current Master Code and press [ ENTER]:
3
To delete any other User Code, enter the User Code's index
number you wish to delete (2-digit),
for example:
for User Code 6, press
4
Press 0 followed by [ENTER]
If successful, you will hear a single confirming beep.
If not, you'll hear three quick error beeps
5 Repeat steps 3 and 4 for additional codes until complete.
6
When all required codes are deleted press key twice
quickly to reset and exit user function mode.