RISCO Group Orbit Pro RP-296 - Manual (Page 27)

user manual
19
Section 5: System Sounds
Besides the visual indications provided by your keypad(s), your system is
designed to produce audible annunciation after certain events. Depending on
the circumstance, such sounds may be made by your system's keypad(s), its
external sounder (e.g. a siren or bell),
EVENT KEYPAD SOUND
SIREN/
BELL
Intrusion
Alarm Rapid beeping
(see Note 5)
YES
(continuous)
Fire Alarm
Rapid beeping
(see Note 3)
YES
(staggered )
Keypad
Police
Emergency
A momentary chirp
MAYBE
(see Note 2)
Keypad Fire
Emergency Rapid beeping
(see Note 3)
YES
(staggered )
Keypad
Auxiliary
Emergency
A momentary chirp no sound
Arming or
disarming
A one second tone if
completed correctly;
three rapid error beeps
if incorrect
(see Note 3)
no sound
Entering an
incorrect key
sequence
Three rapid beeps
(see Note 3)
no sound
Entry Delay
countdown
Slowly repeating tones
until the entry delay
period expires
(see Note
3)
no sound
Exit Delay
countdown
Slowly repeating tones
until the exit delay
period expires
(see Note
3)
MAYBE
(see Note 1)
Entering data
into the User
Functions
mode
(see page 20)
A one second tone if
completed correctly;
three rapid error beeps
if incorrect
(see Note 3)
no sound
NOTE 1:
If selected during the installation,
a brief "chirp" may be heard from
the siren when the Exit Delay
period expires.
NOTE 2:
Whether or not the Police
Emergency alarm is annunciated
by the external sounder is
determined by the alarm
company during your system's
installation.
NOTE 3:
Keypad beeps in response to
Entry/Exit Delay countdowns,
Keypad Fire Emergencies, and
keypad errors and confirmations
are typically enabled. At the
user's discretion, such beeps
may be disabled.
NOTE 4:
Any intrusion zone, if selected for
the chime feature, will, when
violated during the disarmed
period, cause the keypad to
annunciate the event (), the
chime can also be disabled when
not desired.
NOTE 5:
Based on decisions made at the
time your alarm system was
installed, keypad(s) may beep
during this type of alarm.
Bell Circuit
Failure or
Fire Loop
Trouble
Three rapid beeps at
10 sec intervals.
no sound