RISCO Group Orbit Pro RP-296 - Manual (Page 24)

user manual 16
DURESS DISARMING
If you are ever coerced into disarming your
system, you can comply with the intruder's
wishes while sending a silent, duress alarm to
the Central Station. To do so, you must use a
special Duress Code. Which when used, will
disarm the system in the regular manner, while
simultaneously transmitting the duress alarm.
For Duress code add 1 to the last digit of your
user cod.
Example:
if your code is 1-2-3-4 your duress code is 1-2-
3-5
If your user code is 5-6-7-8 your duress code is
5-6-7-9
If user code is 6-7-8-9 duress code is 6-7-8-0
Under no circumstances must the Duress Code
be used haphazardly or without reason. Central
Stations, along with Police Departments, treat
Duress Codes very seriously and take
immediate action.
DISARMING BY USING THE DURESS CODE
STEP DESCRIPTION
1
If outside the premises, open an "entry" door. The keypad(s) will
beep—indicating that the Entry Delay period has begun.
2
Enter your Duress Code, and press [ ENTER] :
Once entered, it will disarm your system and send a silent alarm
to the Central Station.