HP LaserJet Ultra M106w - Manual (Page 57)

a.
Press and hold the Resume/Cancel button until the Ready light begins blinking.
b.
Release the Resume/Cancel button.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on
the printer configuration page. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
Step two: Change the Wi-Fi Direct name
1. Click the Networking tab.
2. On the left navigation pane, click the Wi-Fi Direct Setup link.
3. In the Wi-Fi Direct Name field, enter the new name.
4. Click Apply.
HP ePrint via email
Use HP ePrint to print documents by sending them as an email attachment to the printer's email address
from any email enabled device.
To use HP ePrint, the printer must meet these requirements:
● The printer must be connected to a wired or wireless network and have Internet access.
● HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.
Follow this procedure to enable HP Web Services and register with HP Connected:
1. Print a configuration page to determine the IP address or host name.
a.
Press and hold the Resume/Cancel button until the Ready light begins blinking.
b.
Release the Resume/Cancel button.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it
displays on the configuration page. Press the Enter key on the computer keyboard. The EWS
opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the
computer.
3. Click the HP Web Services tab, and then click Enable. The printer enables Web Services, and then
prints an information page.
ENWW Mobile printing 47