RIGOL DP832A - Manual (Page 101)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-77
:RECAll Commands
Command List:
 :RECAll:LOCal
 :RECAll:EXTErnal
:RECAll:LOCal
Syntax :RECAll:LOCal {1|2|3|4|5|6|7|8|9|10}
Description Recall the instrument state file stored in the specified storage location in the internal
memory of the instrument.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|8|9|10} Discrete 1|2|3|4|5|6|7|8|9|10 None
Explanation  {1|2|3|4|5|6|7|8|9|10} represent the corresponding storage locations in the
internal memory of the instrument respectively.
 You can also send the *RCL or :MEMory[:STATe]:LOAD command to recall the
instrument state file stored in the internal memory of the instrument.
Example :RECA:LOC 1 /*Recall the instrument state file stored in storage location 1 in the
internal memory of the instrument*/
Related
Commands
*RCL
:MEMory[:STATe]:LOAD
:RECAll:EXTErnal
Syntax :RECAll:EXTErnal <file_name>
Description Recall the instrument state file stored in the root directory of the external memory of
the instrument.
Parameter Name Type Range Default
<file_name> ASCII string
Refer to the
"Explanation"
None
Explanation  <file_name> is the specified filename and does not include the filename suffix
".RSF".
 You can also send the :MMEMory:LOAD command to recall the instrument state
file stored in the current operation directory of the external memory of the
instrument.
Example :RECA:EXTE STA /*Recall the instrument state file named STA.RSF in the root
directory of the external memory of the instrument*/
Related
Command
:MMEMory:LOAD