RIGOL DP832A - Manual (Page 113)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-89
[:SOURce[<n>]]:CURRent:PROTection:TRIPped?
Syntax [:SOURce[<n>]]:CURRent:PROTection:TRIPped?
Description Query whether OCP occurred on the specified channel.
Parameter Name Type Range Default
[<n>] Integer 1|2|3 1
Explanation  OCP refers to that the output turns off automatically when the actual output current
of the channel exceeds the overcurrent protection value.
 When [:SOURce[<n>]] or [<n>] is omitted, the system queries whether OCP
occurred on the current channel.
 You can also send the :OUTPut:OCP:ALAR? or :OUTPut:OCP:QUES? command to
query whether OCP occurred on the specified channel.
 You can send the [:SOURce[<n>]]:CURRent:PROTection:CLEar command to clear
the circuit and label of the OCP occurred on the specified channel.
Return
Format
The query returns YES or NO.
Example :CURR:PROT:TRIP? /*Query whether OCP occurred on the current channel and the
query returns YES*/
Related
Commands
:OUTPut:OCP:ALAR?
:OUTPut:OCP:QUES?
[:SOURce[<n>]]:CURRent:PROTection:CLEar