RIGOL DP832A - Manual (Page 95)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-71
:PRESet:USER[<n>]:SET:DEFault
Syntax :PRESet:USER[<n>]:SET:DEFault
Description Restore the parameters of the specified user-defined setting to default values.
Parameter Name Type Range Default
[<n>] Discrete 1|2|3|4 None
Explanation  For the default voltage/current values of each channel in the user-defined
settings, please refer to Table 2-3; the default OVP/OCP values are the
maximum OVP/OCP values of the current channel.
 When [<n>] is 1, 2, 3 or 4, the system sets the related parameters of the first,
second, third or fourth group of user-defined setting respectively. When [<n>]
is omitted, the system sets the parameters of the user-defined setting
currently selected by default.