RIGOL DP832A - Manual (Page 103)

Chapter 2 Command System RIGOL
DP800 Programming Guide 2-79
:RECorder:MEMory
Syntax :RECorder:MEMory {1|2|3|4|5|6|7|8|9|10},<filename>
Description Store the record file to the specified storage location in the internal memory with
the specified filename.
Parameter Name Type Range Default
{1|2|3|4|5|6|7|
8|9|10}
Discrete 1|2|3|4|5|6|7|8|9|10 10
<filename> ASCII string Refer to the "Explanation" RIGOL.ROF
Explanation  At most 10 record files can be stored in the DP800 internal memory.
{1|2|3|4|5|6|7|8|9|10} represents the 10 record file storage locations in the
internal memory respectively.
 <filename> is the filename of the record file. Its format is <name>.ROF;
wherein, <name> is the name of the file and can be Chinese characters,
English characters or numbers (a Chinese character is counted as two
characters) with up to 9 characters; .ROF is the suffix of the record file and can
be omitted.
 You cannot set the record period and storage directory when the recorder is
enabled ( :RECorder[:STATe] ); please set the desired storage directory before
enabling the recorder.
 You can use the :RECorder:MMEMory command to store the record file to the
external memory with the specified filename or use
the :RECorder:DESTination? command to query the current storage directory.
 When the recorder is turned off, the instrument stores the record file to the
specified storage directory using the specified filename.
Example :REC:MEM 5,TEST1 /*Store the record file to record file storage location 5 in the
internal memory with the filename "TEST1.ROF"*/
Related
Commands
:RECorder:DESTination?
:RECorder:MMEMory
:RECorder[:STATe]