RIGOL DP832A - Manual (Page 74)

RIGOL Chapter 2 Command System
2-50 DP800 Programming Guide
:MONItor:VOLTage:CONDition
Syntax :MONItor:VOLTage:CONDition {<V|>V|NONE},{AND|OR|NONE}
:MONItor:VOLTage:CONDition?
Description Set the voltage monitor condition of the monitor (the current channel).
Query the voltage monitor condition of the monitor (the current channel).
Parameter Name Type Range Default
{<V|>V|NONE} Discrete <V|>V|NONE NONE
{AND|OR|NONE} Discrete AND|OR|NONE NONE
Explanation  You can set the voltage monitor condition to "<V" (<voltage), ">V" (>voltage)
or "NONE". "NONE" means do not monitor the voltage.
 The actual monitor condition is the logic combination of the voltage, current
and power.
 You can send the :MONItor:VOLTage[:VALue] command to set the voltage
monitor value.
Return Format The query returns the voltage monitor condition and logic relation separated by
comma, for example, <V,AND.
Example :MONI:VOLT:COND <V,AND /*Set the voltage monitor condition (the current
channel) to "<V,AND"*/
:MONI:VOLT:COND? /*Query the current voltage monitor condition (the
current channel) and the query returns
<V,AND*/
Related
Commands
:MONItor:CURRent:CONDition
:MONItor:CURRent[:VALue]
:MONItor:POWER:CONDition
:MONItor:POWER[:VALue]
:MONItor:VOLTage[:VALue]