RIGOL DP832A - Manual (Page 70)

RIGOL Chapter 2 Command System
2-46 DP800 Programming Guide
:MONItor:CURRent:CONDition
Syntax :MONItor:CURRent:CONDition {<C|>C|NONE},{AND|OR|NONE}
:MONItor:CURRent:CONDition?
Description Set the current monitor condition of the monitor (the current channel).
Query the current monitor condition of the monitor (the current channel).
Parameter Name Type Range Default
{<C|>C|NONE} Discrete <C|>C|NONE NONE
{AND|OR|NONE} Discrete AND|OR|NONE NONE
Explanation  You can set the current monitor condition to "<C" (<current), ">C" (>current)
or "NONE". "NONE" means do not monitor the current.
 The actual monitor condition is the logic combination of the voltage, current
and power. The logic relations include "AND", "OR" and "NONE"; wherein,
"NONE" indicates that no logic relation is set.
 You can send the :MONItor:CURRent[:VALue] command to set the current
monitor value.
Return Format The query returns the current monitor condition and logic relation separated by
comma, for example, <C,AND.
Example :MONI:CURR:COND <C,AND /*Set the current monitor condition (the current
channel) to "<C,AND"*/
:MONI:CURR:COND? /*Query the current monitor condition (the current
channel) and the query returns <C,AND*/
Related
Commands
:MONItor:CURRent[:VALue]
:MONItor:POWER:CONDition
:MONItor:POWER[:VALue]
:MONItor:VOLTage:CONDition
:MONItor:VOLTage[:VALue]