Rose Electronics Vista DVI Plus - Manual (Page 15)

Installation and Operations Manual 11
Auto scanning
The auto-scan feature switches between the connected computers, in sequence, at
a pre-defined rate.
(See Table 2, Auto-scan Time T x)
There are two scanning mode options, cycle all ports and cycle only the active ports.
The auto-scan mode option is set in the User Preference, U 7 or U 8 section (See
Table 2).
When option U 8 is selected (Cycle only active ports) when you use the mouse
button or the hotkeys + tab to change channels, only channels that have an active
computer connected will display, un-active channels will be skipped.
To start the auto-scan mode, using the user console keyboard, press Ctrl + Alt + X.
Scanning will start at the pre-defined rate (T x) and all or only active channels will be
displayed depending on the User Preference setting (U 7 or U 8).
To stop the auto-scanning, press the “COMPUTER” button on the front panel or
select a specific channel using the hotkey + channel number.
Installing / synchronizing multiple units
If your system requires video from a dual head PC, the Vista DVI Plus unit can be
connected to a second unit to handle the second video. The main unit is connected
to the second unit using a serial synchronization cable.
See Attachment “C” for installation and operation instructions.
OSD – Configuration menus
The Vista DVI Plus 1 x 8 model has an OSD configuration menu that enables you to
configure several settings. To access the configuration menu, simultaneously press
the Ctrl + Alt + M key, then press the F1 key for “More menus”.

Functions

Reset to Factory Defaults

Global Preferences

Mouse Switching

OSD Color

Default Mode

Reminder Banner

Autoscan Mode

Autoscan period

OSD Dwell Time

Setup Options

Language

Hotkeys

Default Channel

Edit Computer List

EDID Options

EDID Source

EDID Refresh