Declaration of conformity – Rose Electronics Vista DVI Plus User Manual

Page 3

Advertising
background image

DECLARATION of CONFORMITY


DECLARATION OF CONFORMITY

ACCORDING TO COUNCIL DIRECTIVE 93/68/EEC

Electromagnetic Compatibility Directive 89/336/EEC


This equipment is in conformity with the protection
requirements of the following Council Directives:
The Declaration of Conformity is based upon compliance of
the product with the following harmonized standards:
EN55022:

Radio Frequency Energy

All interface cables used with this equipment must be shielded in order to maintain compliance
with radio frequency energy emission regulations and ensure a suitably high level of immunity
to electromagnetic disturbances.

European EMC directive 89/336/EEC

This equipment has been tested and found to comply with the limits for a class A computing
device in accordance with the specifications in the European standard EN55022. These limits
are designed to provide reasonable protection against harmful interference. This equipment
generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions may cause harmful interference to radio or television
reception. However, there is no guarantee that harmful interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment on and off, the user is encouraged to correct the
interference with one or more of the following measures: (a) Reorient or relocate the receiving
antenna. (b ) Increase the separation between the equipment and the receiver. (c) Connect the
equipment to an outlet on a circuit different from that to which the receiver is connected. (d)
Consult the supplier or an experienced radio/TV technician for help.

FCC Compliance Statement (United States)

This equipment generates, uses, and can radiate radio frequency energy and if not installed
and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause
interference to radio communication. It has been tested and found to comply with the limits for a
class A computing device in accordance with the specifications in Subpart J of part 15 of FCC
rules, which are designed to provide reasonable protection against such interference when the
equipment is operated in a commercial environment. Operation of this equipment in a
residential area may cause interference, in which case the user, at his own expense, will be
required to take whatever measures may be necessary to correct the interference. Changes or
modifications not expressly approved by the manufacturer could void the user’s authority to
operate the equipment.

Canadian Department of Communications RFI statement

This equipment does not exceed the class A limits for radio noise emissions from digital
apparatus set out in the radio interference regulations of the Canadian Department of
Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le règlement sur le
brouillage radioélectriques publié par le ministère des Communications du Canada.






Advertising
This manual is related to the following products: