Rosen Aviation 1060 Series : 10.6 inch WideScreen High definition - Manual (Page 10)

Rosen Aviation 10.6” HD Widescreen Bulkhead Display
Document Number: 106282 Revision: D
Date: 03/20/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 10 of 30
5.2. User Menu
The Main Menu opens to the screen, shown in Figure 4 (above). Highlight User and press the ►
button to access the User menu options.
Press ▼▲ buttons to select a User option, and then press ENTER to change its value.
Figure 5 User menu options
5.2.1. Backlight
Use this setting to adjust the intensity of the LCD backlight.
From the User page, press the ► and ▼buttons to select Backlight, and then press
ENTER to open the control bar shown below.
Press the ◄ or the ► buttons to change the value on the control bar accordingly.
Press ENTER to set the backlight brightness and close the control bar.
Figure 6 Backlight option
5.2.2. Aspect Ratio
Use Aspect Ratio to adjust the picture expansion to match the encoding of the source
image most closely.
To change the Aspect Ratio from the remote, press ASPECT, or select UserAspect
Ratio and then press ENTER. To switch the display between aspect ratio modes
(described below), press the
▲ ▼ buttons. Watch for proportional changes in the
background picture and choose the optimal mode for the source. Press ENTER to set the
mode and press EXIT to close the OSD.
Full Screen: Displays standard 4:3 source video in 16:9 aspect ratio by expanding the
image horizontally. Circles will appear as ovals in the central and outer portions of the
screen. If the source image is letterboxed, there will be black bars at the top and bottom
of the image. A 16:9 widescreen source will fill the screen with minimal distortion.
Source and Auto
Adjust are only
available in
Standard
Operation
Mode , and Auto
Adjust is active only
with a VGA (RGB)
source.