Rosen Aviation 1060 Series : 10.6 inch WideScreen High definition - Manual (Page 14)

Rosen Aviation 10.6” HD Widescreen Bulkhead Display
Document Number: 106282 Revision: D
Date: 03/20/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 14 of 30
5.3.4.1.1. Color Levels: Red, Green, Blue
Setting the Color Temperature to User will make the Red, Blue, and Green options
active. Each color adjusts the low-level registers of its respective color value in the
picture.
Select the Image AdjustAdvancedColor Temperature and press ENTER.
Set Color Temperature to User, and then press ENTER.
Press ▼ to choose a color level, and then press ENTER to open a control bar to
adjust the value, similar to Figure 12 shown below.
 Red: Press
◄
to show more cyan-colored tones, and press
►
to intensify the
red tones.
 Green: Press
◄
to show more magenta tones, and press
►
to intensify the
green tones.
 Blue: Press
◄
to show more yellow tones, and press
►
to intensify the blue
tones.
Press ENTER to set the color and close the control bar.
Press EXIT to close the OSD.
Figure 12 Sample color-level control bar
5.3.4.2. Restore Defaults
This option restores the default screen settings from the user menus for all video
sources. It does not erase Technician Menu settings or change the internal time and
date. A Defaults Restored message appears in the lower corner of the menu after the
restore is complete.
Figure 13 Restore Defaults option
Status
message
RGB
options
only