Rosen Aviation 1060 Series : 10.6 inch WideScreen High definition - Manual (Page 17)

Rosen Aviation 10.6” HD Widescreen Bulkhead Display
Document Number: 106282 Revision: D
Date: 03/20/14
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 17 of 30
6. TECHNICIAN MENU
To protect the display from accidental or unintentional adjustments, the Technician Menu is
accessible only with a special button combination. To avoid repeating this button sequence after
each change, the menu remains active until you manually close it.
Whenever there is a change to the OSD, exit the menu, and cycle
power for the changes to be fully accepted.
To open the Technician Menu, start with the display on, and press the following buttons in this
order:
1. Press INFO to open the Info page in the Main Menu.
2. With the Back option highlighted on the Info page, press the
▲▼▲▼▲▲▲ buttons
and then press MENU.
3. The Technician Menu opens. The options you see depend on the Mode Menu
settings. Splash Screen and the Source Mode menu will appear only when the Mode
MenuOperation Mode is set to Standard.
Figure 18 Technician Main Menus
To navigate the menu options, press the ▲ or ▼ buttons.
To close the Technician Menu and return to the Info Page, select the Back option and press
MENU. To close the Technician Menu and the OSD, press EXIT.
Note: The Main Menu options are not selectable while the Technician Menu is open.
Auto Detect mode (default) Standard mode