Rugged Cams Workhorse DVR 16 Channel - Manual (Page 2)

1
Statement of Compliance with FCC
Model Name: Workhorse 120-16
This device complies with Section 15 of the FCC Rules. Operation is covered by the following
provisions: (1) This device shall not cause harmful interference, and; (2) this device must accept
any interference received including interference that may cause unintended operations.
Warning
Unauthorized reproduction of all or part of this manual is strictly prohibited.
Cautions
To get the best use out of this product, be sure to read the cautions before using the product.
For your safety, please take note of the following:
z The figures in this manual are for illustration purposes only (may differ from the actual
product).
z The specifications and design of the product are subject to change without prior notice for
purposes of quality improvement.
z Safety Notes on the Lithium Battery
1. Replace lithium batteries as instructed in this manual.
2. Dispose of used lithium batteries properly.
z Caution
1. To prevent electric shock when installing, moving, or opening the DVR and peripheral
devices, connect and disconnect the cables as instructed in this manual. All cables
must be connected to grounded outlets.
2. Install the DVR such that it is easy to disconnect the power cord.
3. Do not use the DVR in water or in wet places (may cause electric shock).
4. Keep the vinyl packing materials used for the DVR or other peripheral devices out of
reach of children (may cause suffocation).
5. The UPS power unit contains a small amount of toxic substances. Improper
installation of the battery, exposure to fire or moisture, or disassembly or short circuit
may cause explosion. Keep the battery pack out of reach of infants and children. Do
not bury used batteries.
z Safety Notes on the DVR
1. Keep the DVR away from heat sources such as heaters (may cause product
deformation or fire).
2. Do not use a damaged power cord (may cause electric shock or fire).
3. Install the DVR in a safe place (impact due to fall or exposure to external shock may
result in product damage or malfunction).