Rugged Cams Workhorse DVR 16 Channel - Manual (Page 24)

23
4. System Operation
4-1. Starting and Shutting down the System
4-1-1. Starting the System
The default password of the local administrator is “00000.”
To change the password, select {Main Setup} Æ {System} Æ {Local Administrator’s
Password}.
With the power connected to the body, press the Power button on the remote control.
The Remote, Network, Backup, HDD, and Alarm LEDs on the front panel are then turned
ON.
Enter the local administrator’s password using the numeric buttons.
Once the correct password is inputted, the system is initialized, and the initial screen appears.
After the system is initialized and started, the video of all connected channels is displayed.
The user can enter a number using the front buttons as shown below:
Odd number: Short-press, Even number: Long-press
Input initialization: Press the [Power] button.
4-1-2. Shutting down the System
Press the [Power button] on the remote control.
Enter the system administrator’s password using the numeric buttons and press the [Select]
button.