Rugged Cams Workhorse DVR 16 Channel - Manual (Page 68)

67
In the access device selection list, select one for the connected storage device.
Check the backup capacity and adjust the available space by using the arrow (▲▼WX)
buttons or pressing the [Select] button.
Note!
To back up a channel or cancel backup, go to the backup channel by using the
arrow (▲▼) buttons and pressing the [Select] button.
The backup channel is then displayed in red.
To change the backup time, go to the starting point of the backup time by selecting
the
button and change the minute bar using the arrow (WX) buttons. To go to
the end point of the backup time, press the [Select] button.