Rugged Cams Workhorse DVR 16 Channel - Manual (Page 52)

51
4-8-4. Multi-channel
Searches the video of multiple channels for the defined time
(1) Date search
Select the search date using the arrow (STW X) and [Select] buttons on the active
calendar window as shown below:
(2) Search time
Select the search date on the calendar window. The recorded one-hour video of each
channel is then displayed in a bar graph as shown below:
Green Continuous recording
Red Motion is recorded.
Blue Sensor signals are recorded.
Yellow Sound is recorded.
Light blue Shows that recording was done before the time was changed
Set the time by using the arrow (WX )or numeric buttons or moving the time indicator and
press the [Select] button.
Input numbers that are less than 10 in two digits using the numeric buttons, e.g., 01 for 1 and 02 for
2.
Viewing the status bar related to time change
1) After the changed folder is searched by the status bar, the bar for the corresponding time zone
is displayed in light blue as shown below:
2) Selecting a changed time causes a list including the updated folder to be displayed as shown
below:
Supported only in multi-channel mode
Without recorded data
Search date
Select ed date
With recorded
data 26