TA Triumph-Adler DC 2023 - Manual (Page 10)

-8-
1. Printer Drivers for Windows 95
(For the PS Printer Drivers)
A Resolution field: Displays the currently selected printing resolution -
600 dpi or 300 dpi. It is normally recommended that this setting be left
on 600 dpi, the highest resolution.
B Toner Save field: Depending upon the setting made here, toner use
can be reduced. It is recommended that this setting be utilized when
printing documents that contain only text. Click on the arrow (
▼ ) to
display a drop-down list, and then choose from that list the desired
setting: Light, Medium, Dark or Off.
C EET field: Displays the currently selected setting for edge
enhancement which enables the clearest reproduction of edges and
curves when printing text and graphics. Click on the arrow (
▼ ) to
display a drop-down list, and then choose from that list the desired
setting: Light, Medium, Dark or Off.
D Special check boxes: Place a check in the appropriate check box in
order to print a negative or a mirror image of the document.
• Print as a negative image: Prints a negative image of the
document. This option is useful for black-and-white or coarse RGB
images.
• Print as a mirror image: Prints a mirror image of the document.
E Page Protection field: Displays whether or not a portion of the
printer’s memory has been designated for printing documents that
contain both text and graphics. This option enables the printer to
create an image of the entire page in memory BEFORE paper is fed
into the printer. This ensures that the entire page will be printed and
helps prevent print overrun errors.
It is normally recommended that this setting be left on Auto. On the
other hand, if you experience difficulty with printing documents such as
those that contain complex graphics, it is recommended that On be
selected. However, selecting On will use more memory in the printer.
F Halftoning radio buttons: Enable selection of the number of lines per
inch (frequency) and angle of the pattern for halftone screens. Adjust
the setting if such irregularities such as moire patterns appear when
printing photographs or complex images.
* Depending upon the application in use, this setting may not be
effective.
G Printer memory field: Displays the currently selected size of the
printer memory. The Printer Driver uses this setting when sending
information such as font data to the printer. The desired memory size
can be selected by typing it directly into this field or by clicking on the
(
▼ , ▲ ) arrows.
H Scaling field: Displays the currently selected magnification ratio
(25% - 400%). The desired magnification can be selected by typing it
directly into this field or clicking on the (
▼ , ▲ ) arrows.
* If your application provides a scaling feature, adjust the scaling in the
application rather than in this Printer Driver.
A
B
C
D
H
G
F
E