TA Triumph-Adler DC 2023 - Manual (Page 14)

-12-
1. Printer Drivers for Windows 95
1-8 Postscript tab (for PS Printer Driver only)
A Postscript output format field: Displays the currently selected
PostScript file format. Click on the arrow ( ▼ ) to display a list of
available file formats, and then choose from that list the desired
format:
• PostScript (optimize for speed): This is the standard setting.
• PostScript (optimize for portability-ADSC): Select this option in
order to create a file that complies with the Adobe Document
Structuring Conventions (ADSC). Each page of your document will
be saved as an individual file. This setting is useful when your
computer and printer communicate through a print spooler.
• Encapsulated PostScript (EPS): Select this option in order to
enable the displayed page to be added to and then print from, for
example, a document created in another program.
B Postscript header radio buttons: Enable selection of whether or not
header information will be sent to the printer each time a document is
printed. If this printer is being used as a local printer, having the
header information sent to the printer only once will save printing time.
However, it is recommended that for normal print jobs – and especially
when this printer is being used as a network printer – the header be
downloaded with each print job.
* This setting is ignored with EPS and Archive files.
C Send Header Now… button: Click to immediately send the PostScript
header to the printer where it will be retained until the printer is turned
off. Once this button is clicked, the Printer Driver will automatically
select the Assume header is downloaded and retained option under
Postscript header.
D Job timeout field: Displays the currently selected time (in seconds)
that the printer – after receiving data from the computer for one page –
will wait for the data for the next page before it cancels the print job.
Change the time to that desired by typing it directly into this field or by
clicking on the (
▼ , ▲ ) arrows. Enter “0” here if you do not want the
print job to be canceled in this manner. However, DO NOT enter “0” if
you are using the printer over a network.
E Wait timeout field: Displays the currently selected time (in seconds)
that the printer will wait to receive the next batch of data related to any
individual page from the computer before it cancels a print job.
Change the time to that desired by typing it directly into this field or by
clicking on the (
▼ , ▲ ) arrows. Enter “0” here if you do not want the
print job to be canceled in this manner. However, DO NOT enter “0” if
you are using the printer over a network.
F Bitmap Compress radio buttons: Enable selection of whether or not
to have graphics compressed before being sent to the printer.
• Compress bitmap images: Select this radio button when you are
using PostScript Level 1 or Level 2 with the printer connected to a
serial port.
• No bitmap compression: Select this radio button when you are
using PostScript Level 1 with the printer connected to a parallel port
or being used over a network.
G Print PostScript error information check box: Enables selection of
whether or not to have an error report printed out whenever a printing
error occurs. The PostScript Printer Driver can detect certain errors
that occur when printing from Windows. Place a check in this check
box if you are having trouble printing.
H Send CTRL+D before job check box: Enables selection of whether or
not to send a CTRL+D command in order to notify the printer that the
current print job is complete and to reset the printer. Place a check in
this check box to have the command sent.
I Send CTRL+D after job check box: Enables selection of whether or
not the Printer Driver will display an alert message if a running
application might be incompatible with some features of the driver.
Place a check in this check box to have the alert message displayed.
A
B
D
E
G
H
I
C
F