And refer to, Send, 2. printer drivers for windows nt 4.0 – TA Triumph-Adler DC 2023 User Manual
Page 30: Ab c d, Send fonts as
-28-
2. Printer Drivers for Windows NT 4.0
●
Send Fonts As…
dialog box
A
Send TrueType fonts as field: Displays the currently selected format in which those TrueType fonts that are not replaced by
PostScript fonts will be sent to the printer. Click on the arrow (
▼
) to display a drop-down list, and then choose from that list the
desired setting:
• Outlines: This option will send outlines, most appropriate for larger point sizes. (However, all smaller point sizes will
automatically be sent as bitmap data.)
• Bitmaps: This option will send bitmaps, most appropriate for smaller point sizes.
• Don’t Send: If this option is selected, no TrueType fonts will be sent to the printer. This option is most appropriate when
sending data to the printer through a print spooler.
B
Threshold size field: Displays the size of the font (in pixels) at which the Printer Driver should switch from sending a TrueType
font as an outline to sending it as bitmap data. The most effective size to enter here will vary depending upon the complexity of
the font. For example, at 600 dpi it is more effective to send TrueType fonts as outlines when non-ornamental fonts are about
14 points or larger. Enter “0” here if you ALWAYS want outline fonts to be sent.
C
Favor system TrueType fonts over printer fonts check box: Enables selection of whether to use system TrueType fonts instead
of PostScript printer fonts when the same font is found in both the computer and the printer. Using printer fonts will result in
faster printing, but printed text will not appear as it does on your computer screen.
D
Send PostScript fonts as field: Displays the currently selected format in which those TrueType fonts that are not replaced by
PostScript fonts will be sent to the printer. Click on the arrow (
▼
) to display a drop-down list, and then choose from that list the
desired setting:
• In Native Format: This option will send the PostScript font data to the printer before printing.
• Don’t Send: If this option is selected, no font data will be sent to the printer. This option is most appropriate when sending
data to the printer through a print spooler.
A
B
C
D