Amprobe AT-5000 Underground-Wire-Tracer - Manual (Page 29)

27
Pairing a Transmitter and Receiver
To pair a transmitter and receiver, make sure both instruments have the Bluetooth feature ON. Press the <Select> soft key to
initiate discovery of the transmitter. Press the <Back> soft key to return to the previous interface.
Upon completion of the transmitter discovery, the receiver displays the paired transmitter. The last four digits of each transmitter
denote the unique identity of each paired unit.
To remove a paired transmitter, use the 4-way navigation button to highlight the desired unit. Press the <Clear> soft key to erase
a paired transmitter from the list.
To remove all paired devices, use the 4-way navigation button to highlight Clear all devices. Press the <Clear> soft key to erase
all paired devices.
SHoRTCUTS MENU
The following shortcuts are available to access from the main screen: Adjust Volume, Backlight Power and Ticket Management.
Push the 4-way navigation button (up/Down/Left/Right) to highlight the Shortcuts menu. •
Push Select to open the shortcuts menu •
Push the 4-way navigation button (Up or Down) to toggle through the options
‘
Push Select to activate an option
‘