PLANET FGSD-910HP - Manual (Page 15)

15
8 PoE IP Cameras
FGSD-910P/
FGSD-910HP
PoE PoE PoE PoE PoE PoE PoE PoE
Perfect Combination 8-Port PoE Switch + 8-Ch NVR
Gigabit Switch
PoE 100Base-TX UTP with PoE
1000Base-T UTP
8 Channel NVR
Monitoring Center
Gigabit Uplink
Figure 2-8: 802.3af IP Surveillance with NVR Connection
Note
Cable distance for switch
The cable distance between the PoE Ethernet Switch and other
network equipment should not exceed 100 meters for UTP/STP
cable.
Make sure the wiring is correct
It can use Category 3/4/5 cable in 10Mbps operation. To reliably
operate your network at 100Mbps or 1000Mbps, you must use an
Unshielded Twisted-Pair (UTP) Category 5/5e/6 cable, or better
Data Grade cabling. While a Category 3 or 4 cable may initially
seem to work, it will soon cause data loss.