PLANET FGSD-910HP - Manual (Page 17)

17
2.6 Power over Ethernet Powered Device
3~5 watts Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other
Ethernet/non-Ethernet end-devices to the central where
UPS is installed for un-interrupt power system and power
control system.
6~12 watts
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory
and Warehouse can install the Access Point anywhere
with no hesitation.
10~12 watts
IP Surveillance
Enterprise, Museum, Campus, Hospital, and Bank can
install IP Camera without limits of installation location. It
needs no electricians to install AC sockets.
3~12 watts
PoE Splitter
PoE Splitter splits the PoE 48V DC over the Ethernet
cable into 5/12V DC power output. It frees the device
deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
3~12 watts
High Power PoE Splitter (FGSD-910HP only)
High PoE Splitter split the PoE 56V DC over the Ethernet
cable into 24/12V DC power output. It frees the device
deployment from restrictions due to power outlet
locations, which eliminate the costs for additional AC
wiring and reduces the installation time.
30 watts
High Power Speed Dome (FGSD-910HP only)
This state-of-the-art design is considerable to fit in
various network environments like traffic centers,
shopping malls, railway stations, warehouses, airports,
and production facilities for the most demanding outdoor
surveillance applications- no need electrician to install AC
sockets.
Note
Since the FGSD-910P / FGSD-910HP per PoE port supports 48V /
56V DC PoE power output, please check and assure the Powered
Device’s (PD) acceptable DC power range is from 48V / 56V DC.
Otherwise, it will damage the Powered Device (PD).