PLANET FGSW-2402S - Manual (Page 15)

FGSW-2402S User's Manual 9
SGSW-A1SX / SGSW-A1LX 1000Base-SX/LX modules
10(FX) Green Lit: indicate the link is established
Blink: Traffic is passing through the port
SGSW-A1SC / SGSW-A1ST 100Base-FX modules
10(FX) Green Lit: indicate the link is established
Blink: Traffic is passing through the port.
100 Green Lit: Full-Duplex
Blink: Half-Duplex / Collision
Off: Half-duplex or not connected
2.1.4 Reset button
At the right side of front panel, the reset button is
designed for rebooting the switch without turning power
off and on.
2.2 Rear Panel
The rear panel of the Switch indicates an AC inlet power socket,
which accepts input power from 100 to 240VAC, 50-60Hz.
Figure 3:FGSW-2402S Switch rear panel
Power Notice:
1. The device is a power-required device, it means, it will not
operate till it is powered. If your networks should active all the
time, please consider using UPS (Uninterrupted Power Supply)
for your device. It will prevent you from network data loss or
network downtime.
2. In some area, installing a surge suppression device may also
help to protect your switch from being damaged by unregulated
surge or current to the Switch or the power adapter.