PLANET FGSW-2402S User Manual
Page 17
FGSW-2402S User's Manual
11
When the FGSW-2402S receives power, the Power LED
should remain solid Green.
2.3.1.2 Rack Mounting
To install the switch in a 19-inch standard rack, follow the
instructions described below.
Step1: Place your FGSW-2402S on a hard flat surface, with the
front panel positioned towards your front side.
Step2: Attach a rack-mount bracket to each side of the switch
with supplied screws attached to the package. Figure 4
shows how to attach brackets to one side of the switch.
Figure 4: Attaching the brackets to the FGSW-2402S
Caution:
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate your warranty.
Step3: Secure the brackets tightly.
Step4: Follow the same steps to attach the second bracket to
the opposite side.
Step5: After the brackets are attached to the switch, use
suitable screws to securely attach the brackets to the
rack, as shown in Figure 5