PLANET FNSW-2400PS - Manual (Page 25)

User’s Manual of FNSW-2400PS
When the Negotiation column is set as Auto, this column is read-only.
• Duplex It is available for selecting when the Negotiation column is set as Force.
When the Negotiation column is set as Auto, this column is read-only.
• Symmetric Pause Flow Control for Full Duplex. The Device can support Pause Frames
flowing in both direction
• Asymmetric Pause Flow Control for Full Duplex. The Device can only support Pause Frames
flowing in one direction
• Back Pressure Flow Control for Half Duplex. A condition wherein a switch causes a
transmitting device to hold off on sending data packets until the switch
bottleneck has been eliminated
• Addr. Learning Address learning is a service that characterizes a learning
bridge, in which the source MAC address of each received packet
is stored so that future packets destined for that address can be
forwarded only to the bridge interface on which that address is
located.
Table 4-6 Descriptions of the Port Configuration Web Page Screen Objects
4.3.2 Port Mirroring
This section introduces detail settings of Port Mirroring function of POE Web Smart Ethernet Switch; the screen in Figure
4-18 appears and Table 4-7 descriptions the Port Mirroring objects of POE Web Smart Ethernet Switch.
Figure 4-18 Port Mirroring Web Page Screen
The page includes the following fields:
Object Description
• Monitored Packets Provide disable and enable the Port Mirroring function, the available op-
tions are Disable, RX, TX, TX & RX. Default mode is Disable.
• Destination Port The destination port can be used to see all monitor port traffic. It can
connect destination port to LAN analyzer or Netxray.
• Source Port The source port that want to monitor. All monitor port traffic will be copied
to destination port.
Table 4-7 Descriptions of the Port Mirroring Screen Objects
- 25 -