PLANET FNSW-2400PS - Manual (Page 8)

User’s Manual of FNSW-2400PS
„ Management idle time security
¾ Management
„ Remote Web interface for Switch management and setup
„ Supports SNMP v1
„ Supports DHCP Option82 and DHCP Relay
„ Firmware upgrade through Web interface
„ Configuration upload / download through Web interface
„ Reset button for system reboot or reset to factory default
1.4 Specification
Model FNSW-2400PS
Hardware Specification
Ports 24 10/100Base-TX RJ-45 Auto-MDI/MDI-X interfaces
Switch Processing Scheme Store-and-Forward
Throughput (packet per second) 3.57Mpps@64Bytes
Switch Fabric 4.8Gbps
Address Table 8K entries
Share Data Buffer 1.75Mb embedded memory for packet buffers
Flow Control Back pressure for Half Duplex, IEEE 802.3x Pause Frame for Full Duplex
Dimensions (W x D x H) 445 x 207 x 45 mm (1U height)
Weight 2.55kg
Power Requirement 100~240V AC, 50-60 Hz, 2A
Power Consumption / Dissipation Max.135 Watts / 460 BTU
Smart Function
System Configuration Web interface, SNMP v1
Port Configuration
Port Speed Duplex mode selection
Port Disable / Enable
Bandwidth Control Yes
Broadcast Storm Control Yes / Threshold 1~63
Port Statistics Display each port’s detail Ethernet traffic counter information
VLAN
24 Port-based VLAN groups
32 IEEE 802.1Q VLAN groups
MTU VLAN
Spanning Tree Protocol STP, IEEE 802.1D (Spanning Tree Protocol)
- 8 -