PLANET XGS3-42000R - Manual (Page 6)


3. Management Module Description
3.1 XGS3-M24GX
The unit front panel provides a simple interface monitoring the Management
Module. Figure 3-1 show the front panel of the Management Module.
XGS3-M24GX Front Panel
XGS3-M24GX 2
PWR RUN
Master FAN
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
25
XFP
25
Ethernet
LNK
ACT Console, 9600, N, 8, 1
14
13
16
15
18
17
20
19
22
21
24
23
Figure 3-1 XGS3-M24GX front panel
■ Gigabit TP interface
10/100/1000Base-T Copper, RJ-45 Twist-Pair: Up to 100 meters.
■ Gigabit SFP slots
1000Base-SX/LX mini-GBIC slot, SFP (Small Factor Pluggable) transceiver module:
From 550 meters (Multi-mode fiber), up to 10/30/50/70/120 kilometers (Single-
mode fiber).
■ 10 Gigabit XFP slot
10GBase-SR/LR mini-GBIC slot, XFP (10 Gigabit Small Form Factor Pluggable)
transceiver module: From 300 meters (Multi-mode fiber), up to 10 kilometers
(Single-mode fiber).
■ Console Port
The console port is a RJ-45 type, RS-232 male seria port connector. It is an
interface for connecting a terminal directly. Through the console port, it provides
rich diagnostic information includes IP Address setting, factory reset, port
management, link status and system setting. Users can use the attached RS-
232 cable in the package and connect to the console port on the device. After
the connection, users an run any terminal emulation program (Hyper Terminal,
ProComm Plus, Telix, Winte
rm and so on) to enter the statup screen of the
device.
Property Specification
Connector RJ-45 (receptacle)
Connector type RS-232
Baud rate
9600bps (default)
Supporting
service Connects to character terminals
Connects to PC serial port and running terminal emulator on PC.