PLANET XGS3-42000R - Manual (Page 8)


■ SFP interfaces
LED Color Function
LNK
Green
To indicate the link through that port is successfully established
with speed
1000Mbps.
Off No data go through the port.
ACT Green
Blink to indicate that the Management Module is actively
sending or receiving data over that port.
■ XFP interface
LED Color Function
LNK
Green
To indicate the link through that port is successfully established
with speed
10Gbps.
Off No data go through the port.
ACT Green
Blink to indicate that the Management Module is actively
sending or receiving data over that port.
3.2 XGS3-M44G
The unit front panel provides a simple interface monitoring the Management
Module. Figure 3-3 show the front panel of the Management Module.
XGS3-M44G Front Panel
XGS3-M44G 2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
20
19
22
21
24
23
26
25
28
27
30
29
32
31
34
33
36
35
38
37
40
39
42
41
44
43
Ethernet
Console, 9600, N, 8, 1
FAN
Master
RUN
PWR
Figure 3-3 XGS3-M44G front panel
■ Gigabit TP interface
10/100/1000Base-T Copper, RJ-45 Twist-Pair: Up to 100 meters.
■ Console Port
The console port is a RJ-45 type, RS-232 male seria port connector. It is an
interface for connecting a terminal directly. Through the console port, it provides
rich diagnostic information includes IP Address setting, factory reset, port
management, link status and system setting. Users can use the attached RS-
232 cable in the package and connect to the console port on the device. After
the connection, users an run any terminal emulation program (Hyper Terminal,
ProComm Plus, Telix, Winterm and so on) to enter the statup screen of the device.