PLANET XGS3-42000R - Manual (Page 22)

22
11. Save the Configuration
In Chassis Switch, the running configuration file stores in the RAM. In the current
version, the running configuration sequence running-config can be saved from
the RAM to FLASH by write command or copy running-config startup-config
command, so that the running configuration sequence becomes the start up
configuration file, which is called configuration save.
XGS3-42000R> enable
XGS3-42000R# copy running-config startup-config
Confirm to overwrite current startup-config configuration [Y/N]: Y
Write running-config to current startup-config successful
Figure 11-1 Copy running-config startup-config screen