PLANET ICA-4500V - Manual (Page 21)

5 Mega-Pixel 20M IR Vari-Focal Dome IP Camera
ICA-4500V
21
2.3 Initial Utility Installation
This chapter shows how to quickly set up your H.264 camera. The camera is with the default
settings. However to help you find the networked camera quickly the windows utility PLANET IP
Wizard II can search the cameras in the network that will help you to configure some basic setting
before you start advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the “IP Wizard II” hyperlink; you will see the dialog box as below.
If the welcome screen does not appear, click “Start” at the taskbar. Then, select “Run”
and type “D:\Utility\IPWizard II\setup.exe”, assume D is your CD-ROM drive.
3. The “Welcome to the Install Shield Wizard for PLANET IP Wizard II” prompt will display on the
screen and click “ Next” to continue.
4. Please click “ Next” to install with original settings, or you may click “Change…” button to
modify the install folder then press “Next” to continue.