PLANET ICA-5150 - Manual (Page 12)

Ultra-mini HD Vandal Dome IP Camera
ICA-5150
12
password (admin).
Restoring the factory default setting will lose all the
previous settings including IP address. User needs to run
the IPWizard II program to search the device and configure
it to let the device work properly again.
2.1.2 I/O Control Instruction
Descriptions for I/O cable set:
Interface Description
DC Power Jack
The input power is 12V DC.
Use the power adapter included in the package for
the camera. Otherwise, an improper power
adapter may damage the unit and result in danger.
Ethernet
The LAN socket is an RJ-45 connector for connection to
10Base-T Ethernet or 100Base-TX Fast Ethernet cabling.
This Ethernet port in the N-Way protocol can detect or
negotiate the transmission speed of the network
automatically. Please use Category 5 cable to connect the
Network Camera to a 100Mbps Fast Ethernet network switch
or hub.
2.2 Hardware Installation
2.2.1 Connector board
1. Please select the most suitable position on the ceiling to install this camera.
2. Use the provided L-wrench, loosen the tamper-resistant housing cover (with screws
still attached on the cover). The unit has a factory installed side conduit entry and one
may adjust the cables to back conduit entry according to installation requirement.