PLANET ICA-5250V - Manual (Page 20)

2.4 Initial Utility Installation
This chapter shows how to quickly set up your H.264 camera. The camera is with the default settings.
However, to help you find the networked camera quickly the windows utility PLANET IP Installer can
search the cameras in the network that will help you to configure some basic setting before you start
advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once completed, a
welcome menu screen will appear.
2. Click the “PLANET IPInstaller II” hyperlink; you will see the dialog box as shown below.
1. If the welcome screen does not appear, click “Start” at the taskbar. Then, select
“Run” and type “D:\Utility\PLANETIPinstaller\PLANETIPinstaller.exe”,
assume D drive is your CD-ROM drive.
When you install the camera in a LAN environment, you may execute PLANET IP Installer to discover
camera’s IP address and set up related parameters in the camera.
2.4.1 Search and Configure Network by PLANET IP Installer
When you install the Camera in a LAN environment, you have two easy ways to search your Cameras
by PLANET IP Installer or UPnP discovery. Here is the way to execute PLANET IP Installer to discover
Camera’s IP address and set up related parameter in a Camera.
Search and Configure Network
1. OS: Windows XP SP2 or above. If the following “Windows Security Alert” pops up, please click
“Unblock”.
20