PLANET ICA-8200 - Manual (Page 5)

5
Bottom Panel
MicroSD Card Slot
RJ-45 LAN
12V DC, 2A
GPIO
Audio In
Audio Out
Interface Description
Power Jack
The input power is 12V DC, 2A.
Note
ONLY use the power adapter that comes with the
package. Otherwise, the product may be damaged.
RJ-45 LAN Socket
Connect to PC or Hub/Switch.
It connects to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built auto-negotiation
protocol can detect or negotiate the transmission speed of
the network automatically. Please use CAT-5 cable to connect
the Network Camera to a 100Mbps Fast Ethernet network
switch or hub.
Note
ONLY use one power source, either from DC
or from 802.3af Power over Ethernet. (For
ICA-8200/ICA-8500 only)
MicroSD Card Slot
The IP camera has a built-in MicroSD card slot for MicroSD
memory card for image / video event recording.
Audio Out
Connect a loud speaker to the IP camera. This is for voice
alert and two-way audio.
Audio In Connect a microphone to the IP camera.
GPIO
The 7-pin terminal block includes 1 input port and 2 output
ports.