Logon to the console – PLANET IGS-10020HPT User Manual
Page 11
11
5. Logon to the Console
Once the terminal has been connected to the device, power on the Industrial
Managed Switch and the terminal will display “running testing procedures”.
Note
1. There are six switches with RJ45 type console connector. (IGS-
10020PT / IGS-10020HPT / IGS-10080MFT / IGS-12040MT /
IGS-20040MT / IGS-20160HPT)
2. Let’s take IGS-20040MT for example.
When the following dialog box shown in Figure 5-1 appears, please enter the
factory default user name “admin” and password “admin”.
User name: admin
Password: admin
Figure 5-1: Console Login screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.