PLANET IGS-10020HPT - Manual (Page 17)

17
8. Resetting the Switch to Default
To reset the IP address to the default IP Address “192.168.0.100” and the
user password to factory default mode (default password is admin), press the
hardware reset button on the front panel for about 10 seconds. After the device is
rebooted, you can login the management Web interface within the same subnet of
192.168.0.xx and default password. Be noted that all the previous setups will be
disappeared after the factory default reset is made.
Mini-
GBIC
100/1000X SFP
RESET
ACT
LNK
10 9
P1 P2 FAULT
Ring R.O.
9
LNK/ACT 1000 LNK/ACT 1000
10
ACT LNK
1000 Reset Button
Figure 8-1: IGS-10020MT Reset Button
ACT
LNK
IGS-10020HPT
9
LNK/ACT 1000 LNK/ACT 1000
10
8
6
4
2
7
5
3
1
RESET
9
Console
115200,N,8,1
P1 P2
Ring R.O.
FAULT
10
100/1000X SFP
10/100/1000T
ACT LNK
PoE In-Use
802.3at PoE
Reset Button
Figure 8-2: IGS-10020PT / IGS-10020HPT Reset Button