PLANET IGS-10020HPT - Manual (Page 13)

13
 Configuration of the IP Address
3. At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 6-2.
IGS-20040MT# configure terminal
IGS-20040MT (config)# interface vlan 1
IGS-20040MT (config-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Industrial
Managed Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Figure 6-2: Configuring IP Address Screen
4. Repeat step 1 to check if the IP address is changed.