PLANET ICA-HM351 - Manual (Page 12)

17B
2.4 Initial Utility Installation
This chapter shows how to quick set up your IP camera. The camera is with the default settings.
However to help you find the networked camera quickly the windows utility PLANET IPWizard can
search the cameras in the network that shall help you to configure some basic setting before you
started advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the “IPWizard II” hyperlink; you will see the dialog box as below.
NOTE:
If the welcome screen does not appear, click “Start” at the taskbar. Then, select
“Run” and type “D:\Utility\IPWizard II\setup.exe”, assume D is your CD-ROM drive.
3. The “Welcome to the InstallShield Wizard for PLANET IPWizard II” prompt will display on the
screen and click “Next” to continue.
4. Please click “Next” to install with original settings, or you may click “Change…” button to
modify the install folder then press “Next” to continue.
12