3 ptz setting – PLANET ICA-HM351 User Manual
Page 53
Advertising
63B
3.6.3 PTZ Setting
This page allow user to modify the RS-485 interface according to the P/T scanner.
Camera Protocol
This device can connect to a PTZ camera or speed dome camera and
controls them thru RS-485 interface.
Camera Address
This is the camera ID set in PTZ camera or speed dome camera.
Note that please DO NOT changes the default value if unnecessary.
If so, user needs to check and set value properly for both sides.
Baud rate
This is the communication speed between network module and P/T
scanner.
NOTE
If need to change these parameters, user needs to check and set
value properly for both, network module and P/T scanner.
53
Advertising