1 network – PLANET ICA-HM351 User Manual

Page 37

Advertising
background image

51B

3.5.1 Network

This section provides the menu of connecting the device through Ethernet cable.

MAC address

Display the Ethernet MAC address of the device. Note that user cannot

change it.

Obtain an IP address

automatically (DHCP)

Enable this checked box when a DHCP server is installed on the

network to issue IP address assignment. With this setting, the IP

address is assigned automatically. If this device cannot get an IP

address within limited tries, the device will assign a default IP address

for 192.168.0.20.

If you do not select “Obtain an IP address automatically”, then you

need to enter these network parameters by yourself.

IP Address

This address is a unique numbers that identifies a computer or device

on the WAN or LAN. These numbers are usually shown in groups

separated by periods, for example: 192.168.0.200

Subnet Mask

Subnets allow network traffic between hosts to be separated based on

the network's configuration. In IP networking, traffic takes the form of

packets. IP subnets advance network security and performance to

some level by organizing hosts into logical groups. Subnet masks

contain four bytes and usually appear in the same "dotted decimal"

data. For example, a very common subnet mask in its binary

37

Advertising