PLANET IPOE-162 User Manual
Page 11
Advertising
11
1. Insert Positive / Negative DC power wires or Neutral / Line AC power
wires into the contacts 1 and 2 for POWER 1, or 5 and 6 for POWER
2.
1 2 3 4 5 6
Figure 2: Power input PINs.
2. Tighten the wire-clamp screws for preventing the wires from loosing.
1
2
3
4
5
6
Power 1
Fault
Power 2
-
+
-
+
Figure 3: PWR1 & PWR2 Pin of Terminal Block.
Note
The wire gauge for the terminal block should be in the
range between 12 ~ 24 AWG.
Advertising