PLANET IPOE-162 - Manual (Page 13)

13
5. Mounting Installation
This section describes how to install the Industrial Equipment and make
connections to it. Please read the following topics and perform the
procedures in the order being presented.
Note
In the installation steps below, this Manual use IGS-801
(PLANET 8 Port Industrial Gigabit Switch) as the
example. However, the steps for PLANET Industrial slim
type Switch, Industrial Media / Serial Converter and
Industrial PoE equipment are similar.
5.1 DIN-Rail Mounting
The DIN-Rail is already screwed on the Industrial Equipment. Please
refer to following figures and know how to hang the Industrial
Equipment:
Step 1: Lightly press the button of DIN-Rail into the track.
1
2
Figure 6: Install Industrial Equipment in DIN-Rail mount.