PLANET VIP-255PT - Manual (Page 36)

Chapter 5
Using the Advanced Phone Functions
Account Setting
Please refer to the previous part “Configuration and Registration” for the basic Account setting
information. The following table lists the instruction of the field about the advanced Account Setting.
Field Name Description
UDP Keep-alive
Message
Defines whether to active the phone UDP Keep-alive mechanism.
The default is Enabled.
UDP Keep-alive
Interval
This parameter specifies how often the phone will send a packet to
the SIP server. Default is 30 seconds.
Login Expire
This parameter specifies the time frequency that phone refreshes
its registration. The default interval is 3600 seconds.
Local SIP Port Local SIP port. The default min value is 5060.
RPort
The parameter allows you configuring the proxy to send responses
back to a particular address and port. The default is disabled.
SIP Session Timer
This document defines an extension to the Session Initiation
Protocol (SIP). This extension allows for a periodic refresh of SIP
sessions through a re-INVITE or UPDATE request. The refresh
allows both user agents and proxies to determine if the SIP session
is still active.
You can only configure these settings via Web interface.
1. Choose Account.
2. Choose Advanced to do the relating settings.
Please consult your system administrator for more information.
Network Setting
PC Port Setting
Please refer to the previous part “Configuration and Registration” for the basic Network LAN setting
information. The following table lists the instruction of the field about the Network PC Port Setting.
36
5