PLANET FT-1105A - Manual (Page 21)

18
A.3 Fiber Optical Cable Connection Parameter
The wiring details are as below:
■ Fiber Optical patch Cables:
Standard Fiber Type Cable
Specification
100Base-FX
(1310nm) Multi-mode 50/125μm or
62.5/125μm
100Base-FX
(1310nm) Multi-mode 50/125μm or
62.5/125μm
Single-mode 9/125μm
100Base-BX-U
(TX :1310/RX :1550)
100Base-BX-D
(TX :1550/RX :1310) Single-mode 9/125μm
A.4 Power Information
The power jack of FT-1105A / FT-1205A is with 2.5mm in the
central post and required +5VDC power input. It will conform to
the bundled AC-DC adapter and Planet’s Media Chassis. Should
you have the problem to make the power connection, please
contact your local sales representative.
Please keep the AC-DC adapter as spare parts when your FT-
1105A / FT-1205A is installed to a Media Chassis.
2.5mm
DC Receptacle 2.5mm
+5V for each slot