PLANET GST-80X Series - Manual (Page 14)

- 14 -
3.2 Managed Media Converter module through MC-1600MR/R48 & MC-1610MR/R48
Chassis
The Web Smart / Management Media Coverter Chassis that can control GST-80x through the management system,
GST-80x can be controlled through Web Browser and terminal emulation program.
The Web Smart Media Coverter Chassis-MC-1600MR/R48 will display out the status of GST-80x, also the Web Smart
Media Coverter Chassis can control the function through the management system.
Through the Web Smart Media Coverter Chassis System, you can control the setting of GST-80X, such as device (Disable
/ Enable), LFP (Disable / Enable).UTP (Auto-negotiation / Manual), speed (10/100/1000Mbps) , duplex mode (Half / Full
duplex mode), Flow control (Disable / Enable). Fiber (Auto-negotiation / Manual).
Item Description
Device To enable or disable per GST-80x Converter board.
LFP To enable or disable the LFP function from GST-80x Converter board.
TP AN Mode To set the UTP port runs at Auto-negotiation or Forced Mode.
TP Speed To set the UTP port runs at 1000Mbps, 100Mbps or 10Mbps.
TP Duplex To set the UTP port runs at Full duplex or Half duplex mode.
TP FC To set the Flow Control of the UTP port to enable or disable.
Fiber AN Mode To set the Fiber port runs at Auto-negotiation or Forced Mode.
#
Notice:
1. Please to note that if converter is connect with switch whichis Auto negotiation, must enable the Auto neogtiaiton
function. If both devices are conveters must disable the Auto neogtiaiton function.
2. Due to firmware structure and restriction of MC-1600MR/R48, the OAM / bandwidth control function not provide in
GST-80x setting Web page screen.