PLANET GST-80X Series User Manual
Page 15
- 15 -
The Management Coverter Chassis-MC-1610MR/R48 will display out the status of GST-80x, also the Management Media
Coverter Chassis can control the function and OAM / Bandwidth control setting through the management system.
Through the Management Media Coverter Chassis System, you can control the setting of GST-80X, such as device
(Disable / Enable), LFP (Disable / Enable).UTP (Auto-negotiation / Manual), speed (10/100/1000Mbps) , duplex mode
(Half / Full duplex mode), Flow control (Disable / Enable). Fiber (Auto-negotiation / Manual).
Item
Description
Device
To enable or disable per GST-80x Converter board.
LFP
To enable or disable the LFP function from GST-80x Converter board.
TP AN Mode
To set the UTP port runs at Auto-negotiation or Forced Mode.
TP Speed
To set the UTP port runs at 1000Mbps, 100Mbps or 10Mbps.
TP Duplex
To set the UTP port runs at Full duplex or Half duplex mode.
TP FC
To set the Flow Control of the UTP port to enable or disable.
Fiber AN Mode
To set the Fiber port runs at Auto-negotiation or Forced Mode.
#
Notice:
Please to note that if converter is connect with switch whichis Auto negotiation, must enable the Auto neogtiaiton function.
If both devices are conveters must disable the Auto neogtiaiton function.