PLANET WAP-4000 - Manual (Page 10)

- 5 -
Chapter 3 Configuring the Wireless Access Point
WAP-4000 can be configured via web browser or bundled utility. It is strongly recommended to configure
and manage WAP-4000 using a wired LAN computer.
3.1 Configure through Web Browser
Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WAP-4000. An AP with an assigned IP address (e.g. http://192.168.1.1) will allow you to monitor and
configure via web browser (e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter the IP address of your WAP-4000 in the address field (default IP address is http://192.168.1.1 ).
Please note that your PC ’s IP address should be on the same IP subnet of the WAP-4000. For
example, you can configure your PC ’s IP address to 192.168.1.2 if WAP-4000 is with IP 192.168.1.1.
3. A User Name and Password dialog box will appear. Please enter your User Name and Password here.
Default User Name and Password are both “admin”. Click Ok.
4. Then you will see the WAP-4000 web configuration page.